Skip to main content
Whatsapp

How to Draw Parking Units Using Presets

Tutorial Video​

Steps​

  1. Search and select Parking Unit section:

    1. Navigate to the Entity Creation section in the ribbon.
    2. In the create entity catalogue, search for and select the Parking Unit entity.
    3. Click the "+" button to open the Parking Unit Presets form.

  2. Create Parking Units - Using Pre-defined presets

    1. A list of common parking unit presets are provided in the pre-defined presets.
    2. By selecting a rectangle from a preset, you can place a rectangle with standard sizes based on the unit type.

  3. Create Parking Unit - Using User defined presets:

    1. You can create user defined parking Unit presets that can be reused across the drawing.
    2. Add the following details for Parking Unit preset:
      1. Name
      2. Stacks Count - Number of stacks in case of mechanically operated stacks
      3. Parking Type: TOTAL_PARKING / VISITOR_PARKING
      4. Parking Unit Type: CAR_PARKING / TWO_WHEELER_PARKING

  4. Click on the "Add" button. A new custom parking unit preset gets created and appears under the user defined presets.

  5. Select a rectangle or polyline against a preset and draw the parking polyline.

  6. Once the entity is created, a name label will automatically appear at its center.

Drawing Conventions​

  • Parking units within a floor plan should be drawn inside the __BN_Parking polyline.
  • Parking units can also be drawn at the plot level without requiring an encompassing __BN_Parking polyline.
  • Parking units should have access through a driveway.

Checkpoints​

  1. The parking unit polyline should not overlap or intersect with another parking unit polyline.
  2. Parking unit polylines should always be inside Parking polylines.
Build Now